PLANET XGS3-24042 - Manual (Page 1058)

58-11
Function:
Enable event debug of dhcp type for SAVI, no command disables the debug.
Command Mode:
Admin Mode.
Usage Guide:
After enable event debug, the relative event information of dhcp type will be print for misarranging.
The no command disables this function.
Example:
Enable binding event debug of dhcp type.
Switch#debug ipv6 dhcp snooping event
58.2.1.3 debug ipv6 dhcp snooping packet
Command:
debug ipv6 dhcp snooping packet
no debug ipv6 dhcp snooping packet
Function:
Enable the debug of DHCPv6 packets, no command disables the debug.
Command Mode:
Admin Mode.
Usage Guide:
After enable packets debug, the relative DHCPv6 packtets will be print for misarranging. The no
command disables this function.
Example:
Enable the debug of DHCPv6 packets.
Switch#debug ipv6 dhcp snooping packet
58.2.1.4 debug ipv6 nd snooping binding
Command:
debug ipv6 nd snooping binding
no debug ipv6 nd snooping binding
Function:
Enable the binding debug of slaac type for SAVI, no command disables the binding debug.
Command Mode:
Admin Mode.