3 debug igmp packet, 4 ip igmp access-group, 3 debug igmp packet -95 – PLANET XGS3-24042 User Manual
Page 820: 4 ip igmp access-group -95
44-95
igmp event debug is on
Switch# 01:04:30:56: IGMP: Group 224.1.1.1 on interface vlan1 timed out
44.9.3 debug igmp packet
Command:
debug igmp packet
no debug igmp packet
Function:
Enable debugging switch of IGMP message information; the “no debug igmp packet” command
disenables the debugging switch
Default:
Disabled
Command Mode:
Admin Mode
Usage Guide:
Enable the debugging switch if querying IGMP message information.
Example:
Switch# debug igmp packet
igmp packet debug is on
Switch #02:17:38:58: IGMP: Send membership query on dvmrp2 for 0.0.0.0
02:17:38:58: IGMP: Received membership query on dvmrp2 from 192.168.1.11 for 0.0
.0.0
02:17:39:26: IGMP: Send membership query on vlan1 for 0.0.0.0
02:17:39:26: IGMP: Received membership query on dvmrp2 from 192.168.1.11 for 0.0
.0.0
44.9.4 ip igmp access-group
Command:
ip igmp access-group {<acl_num | acl_name>}
no ip igmp access-group
Function:
Configure interface to filter IGMP group; the “no ip igmp access-group” command cancels the
filter condition
Parameter: