PLANET XGS3-24042 - Manual (Page 424)

28-63
message, and let the server to process it. Before enabling this function, users should make sure
that the DHCP service is enabled and the Relay Agent will transmit the udp broadcast messages
whose destination port is 67.
Example:
Enable the option82 function of the Relay Agent.
Switch(config)#service dhcp
Switch(config)# ip forward-protocol udp bootps
Switch(config)# ip dhcp relay information option
28.3 ip dhcp relay information option delimiter
Command:
ip dhcp relay information option delimiter [colon | dot | slash | space]
no ip dhcp relay information option delimiter
Function:
Set the delimiter of each parameter for suboption of option82 in global mode, no command restores
the delimiter as slash.
Command Mode:
Global mode
Default Settings:
slash (“/”).
User Guide:
Divide the parameters with the configured delimiters after users have defined them which are used
to create suboption (remot-de, circuit-id) of option82 in global mode.
Example:
Set the parameter delimiters as dot (“.”) for suboption of option82.
Switch(config)#ip dhcp relay information option delimiter dot
28.4 ip dhcp relay information option remote-id
Command:
ip dhcp relay information option remote-id {standard | <remote-id>}
no ip dhcp relay information option remote-id
Function:
Set the suboption2 (remote ID option) content of option 82 added by DHCP request packets (They