PLANET XGS3-24042 - Manual (Page 473)

30-112
00-00-00-00-00-13 192.168.40.13 Ethernet1/0/4 1 SU
00-00-00-00-00-14 192.168.40.14 Ethernet1/0/4 1 SU
00-00-00-00-00-15 192.168.40.15 Ethernet1/0/5 1 SL
00-00-00-00-00-16 192.168.40.16 Ethernet1/0/5 1 SL
--------------------------------------------------------------------------
The flag explanation of the binding state:
S The static binding is configured by shell command
D The dynamic binding type
U The binding is uploaded to the server
R The static binding is configured by the server
O DHCP response with the option82
L The hardware drive is announced by the binding
X Announcing dot1x module is successful
E Announcing dot1x module is failing
30.32 show trustview status
Command:
show trustview status
Function:
To show all kinds of private packets state information, which sending or receiving from TrustView
(inter security management background system).
Command Mode:
Admin and Global Configuration Mode.
Usage Guide:
This command can be used for debugging the communication messages between the switch and
the TrustView server, messages such as protocol version notification, encryption negotiation, free
resource and web URL redirection, and the number of forced log-off messages, as well as the
number of forced accounting update messages, can be displayed.
Example:
Switch#show trustview status
Primary TrustView Server 200.101.0.9:9119
TrustView version2 message inform successed
TrustView inform free resource successed
TrustView inform web redirect address successed