PLANET XGS3-24042 - Manual (Page 494)

31-133
count:0 means the rule has been matched for zero
times. And refcount:0 means the rule is referenced
for zero times.
31.32 show route-map
Command:
show route-map
Function:
Show the content of route-map.
Command Mode:
Admin mode
Example:
Switch# show route-map
route-map a, deny, sequence 10
Match clauses:
as-path 60
Set clauses:
metric 10
Displayed information Explanation
route-map a, deny, sequence 10 route-map a means the name of route map is a,
deny means the deny mode, sequence 10 means
the sequence number is 10
Match clauses: Match sub
as-path 60 Detailed contents in the Match sub
Set clauses: Set sub
metric 10 Detailed content in the Set clause
31.33 show router-id
Command:
show router-id
Function:
Show the content of router-id.