PLANET XGS3-24042 - Manual (Page 1198)

76-16
Related Commands:
enable-ldp
76.26 ldp advertisement-mode
Command:
ldp advertisement-mode {downstream-on-demand | downstream-unsolicited}
no ldp advertisement-mode {downstream-on-demand | downstream-unsolicited}
Function:
Set the interface label advertisement mode; the no operation will cancel the configuration.
Command Mode:
Interface Configuration Mode.
Usage Guide:
Implementing this command will set the label advertisement mode as downstream-unsolicited or
downstream-on-demand. Parameters different with the global configuration can be used when
configuring the interface. By default, the value is the global default or the global configuration,
unless the interface has its own settings. This mode works together with two other modes, and any
change of it will affect the other two at the same time. If the parameter is downstream-unsolicited,
the label retention mode will be Liberal and the LSP control mode will be Independent, if it is
downstream-on-demand, the label retention mode will be Conservative and the LSP control mode
will be Ordered. Parameters different with the global configuration can be used when configuring
the interface with this command.
Example:
Configure the label advertisement mode as downstream-unsolicited in the interface mode.
Switch(config)#int vlan 9
Switch(Config-if-Vlan9)#ldp advertisement-mode downstream-unsolicited
Related Commands:
label-retention-mode, ldp label-retention-mode, advertisement-mode
76.27 ldp hello-interval
Commands:
ldp hello-interval <hello-interval>
no ldp hello-interval
Function: