PLANET XGS3-24042 - Manual (Page 691)

37-330
show ip bgp [<ADDRESS-FAMILY>] summary
Function:
For displaying the BGP summary information.
Parameter:
<ADDRESS-FAMILY>: Address-family such as “ipv4 unicast”.
Command Mode:
Admin and configuration mode
Usage Guide:
Display some basic summary information of BGP.
Example:
Switch#show ip bgp summary
BGP router identifier 10.1.1.66, local AS number 200
BGP table version is 1
1 BGP AS-PATH entries
0 BGP community entries
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.1.1.68 4 300 0 0 0 0 0 never Active
Total number of neighbors 1
Display Contents Explanation
identifier Local identifier
local AS number The number of AS of local router
table version the version number of BGP interior database
AS-PATH entries The tabulation of the AS-PATH entries
community entries The property of the community entries
Neighbor Neighbor address
V The BGP version of neighbor running
AS The AS number of neighbor what is affiliated with
MsgRcvd The amount of message received from neighbor
MsgSent The amount of message sent to the neighbor
TblVer the version of route table
Up/Down It will display the conversation time length if the state with
neighbor was established, otherwise display the present
status.
State/PfxRcd If the state is established, display the amount of the prefix
received of the router.otherwise,display the state of the
neighbor at present.