PLANET XGS3-24042 - Manual (Page 645)

37-284
37.40 ip community-list
Command:
ip community-list {<LISTNAME> | <1-199> | [expanded <WORD>] | [standard <WORD>]}
{deny | permit} <.COMMUNITY>
no ip community-list {<LISTNAME> | <1-199> | [expanded <WORD>] | [standard <WORD>]}
[{deny | permit} <.COMMUNITY>]
Function:
Configure the community-list. The “no ip community-list {<LISTNAME>|<1-199>|[expanded
<WORD>]|[standard <WORD>]} [{deny|permit} <.COMMUNITY>]” command deletes the
community list.
Parameter:
<LISTNAME>: name of community list.
<1-199>: Standard or extended community number.
<WORD>: Standard or extended community number.
<.COMMUNITY >: Members of the community list, which may be the combination of aa:nn, or
internet, local-AS, no-advertise, and no-export. It can be shown in regular expressions under
extended conditions.
Command Mode:
Global mode
Usage Guide:
With this command we can configure the community-list so to supply terms for the
pass/filter/search.
Example:
Configure the ip community-list named LN, permit community attribute as 100:10.
Switch(config)# ip community-list LN permit 100:10
37.41 ip extcommunity-list
Command:
ip extcommunity-list {<LISTNAME>|<1-199>|[expanded <WORD>]|[standard <WORD>]}
{deny|permit} <.COMMUNITY>
no ip extcommunity-list {<LISTNAME>|<1-199>|[expanded <WORD>]|[standard <WORD>]}
{deny|permit} <.COMMUNITY>
Function:
Configure the extended community-list. The “no ip extcommunity-list