PLANET XGS3-24042 - Manual (Page 1102)

63-9
show ulpp flush counter interface {ethernet <IFNAME> | <IFNAME>}
Function:
Show the statistic information of the flush packets.
Parameter:
<IFNAME> is the name of the ports.
Command mode:
Admin mode.
Usage Guide:
Show the statistic information of the flush packets, such as: the information of the flush packets
number which has been received, the time information that receive the flush packets finally.
Example:
Show the statistic information of the flush packets for ULPP group1.
Switch# show ulpp flush counter interface e1/0/1
Received flush packets: 10
63.16 show ulpp flush-receive-port
Command:
show ulpp flush-receive-port
Function:
Show the port which receive flush packet, flush type and control VLAN.
Command mode:
Admin mode.
Example:
Show the information that the port receives flush packets.
Switch# show ulpp flush-receive-port
ULPP flush-receive portlist:
Portname Type Control Vlan
------------------------------------------------
Ethernet1/0/1 ARP 1
Ethernet1/0/3 MAC 1;3;5-10
63.17 show ulpp group
Command: