PLANET XGS3-24042 - Manual (Page 519)

33-158
Switch# config terminal
Switch(config)# router rip
Switch(config-router)# offset-list 1 in 5 vlan 1
Related Command:
access-list
33.29 passive-interface
Command:
passive-interface <ifname>
no passive-interface <ifname>
Function:
Set the RIP layer 3 switch blocks RIP broadcast on specified interface, on which the RIP data
packets will only be sent to layer 3 switches configured with neighbor.
Parameter:
<ifname> is the name of specific interface.
Default:
Not configured
Command Mode:
Router mode
Example:
Switch# config terminal
Switch(config)# router rip
Switch(config-router)# passive-interface vlan 1
Related Command:
show ip rip
33.30 recv-buffer-size
Command:
recv-buffer-size<size>
no recv-buffer-size
Function:
This command configures the size of UDP receiving buffer zone of RIP; the “no recv-buffer-size”
command restores the system default.