PLANET XGS3-24042 - Manual (Page 425)

28-64
are received by the interface). The no command sets the additive suboption2 (remote ID option)
format of option 82 as standard.
Parameters:
standard means the default VLAN MAC format. <remote-id> means the remote-id content of
option 82 specified by users, its length can not exceed 64 characters.
Command Mode:
Global Mode
Default Settings:
Use standard format to set remote-id of option 82.
User Guide:
The additive option 82 information needs to associate with third-party DHCP server, it is used to
specify the remote-id content by users when the standard remote-id format can not satisfy server’s
request.
Example:
Set the suboption remote-id of DHCP option82 as street-1-1.
Switch(config)#ip dhcp relay information option remote-id street-1-1
28.5 ip dhcp relay information option remote-id format
Command:
ip dhcp relay information option remote-id format {default | vs-hp}
Function:
Set remote-id format of Relay Agent option82.
Parameters:
default means that remote-id is the VLAN MAC address with hexadecimal format, vs-hp means that
remote-id is compatible with the remote-id format of HP manufacturer.
Command Mode:
Global mode
Default Setting:
default.
User Guide:
The default remote-id format defined as below:
Remote option
2 6 MAC
1 byte 1 byte
6 byte
type
Length