PLANET XGS3-24042 - Manual (Page 367)

20-6
Example:
Enable ARP scanning prevention log function of the switch.
Switch(config)#anti-arpscan log enable
20.9 anti-arpscan trap enable
Command:
anti-arpscan trap enable
no anti-arpscan trap enable
Function:
Enable ARP scanning prevention SNMP Trap function; ”no anti-arpscan trap enable” command
disable ARP scanning prevention SNMP Trap function.
Default Settings:
Disable ARP scanning prevention SNMP Trap function.
Command Mode:
Global configuration mode
User Guide:
After enabling ARP scanning prevention SNMP Trap function, users will receive Trap message
whenever a port is closed or recovered by ARP scanning prevention, and whenever IP t is closed or
recovered by ARP scanning prevention.
Example:
Enable ARP scanning prevention SNMP Trap function of the switch.
Switch(config)#anti-arpscan trap enable
20.10 show anti-arpscan
Command:
show anti-arpscan [trust [ip | port | supertrust-port] |prohibited [ip | port]]
Function:
Display the operation information of ARP scanning prevention function.
Default Settings:
Display every port to tell whether it is a trusted port and whether it is closed. If the port is closed,
then display how long it has been closed. Display all the trusted IP and disabled IP.
Command Mode:
Admin Mode