PLANET XGS3-24042 - Manual (Page 732)

44-7
Iif ingress interface of the entries
Wrong packets received from the wrong interface
Oif egress interface of the entries
TTL the value of TTL
44.2 Commands for PIM-DM
44.2.1 debug pim timer sat
Command:
debug pim timer sat
no debug pim timer sat
Function:
Enable debug switch of PIM-DM source activity timer information in detail; the “no debug pim timer
sat” command disenables the debug switch.
Default:
Disabled.
Command Mode:
Admin Mode.
Usage Guide:
Enable the switch, and display source activity timer information in detail.
Example:
Switch # debug ip pim timer sat
Remark:
Other debug switches in PIM-DM are common in PIM-SM, including debug pim event, debug pim
packet, debug pim nexthop, debug pim nsm, debug pim mfc, debug pim timer, debug pim state,
refer to PIM-SM handbook.
44.2.2 debug pim timer srt
Command:
debug pim timer srt
no debug pim timer srt
Function:
Enable debug switch of PIM-DM state-refresh timer information in detail; the “no debug pim timer
srt” command disenables the debug switch.