PLANET XGS3-24042 - Manual (Page 1055)

58-8
58.1.12 savi max-dad-dalay
Command:
savi max-dad-delay <max-dad-delay>
no savi max-dad-delay
Function:
Configure the dynamic binding at DETECTION state and send lifetime period of DAD NS packet
detection, no command restores the default value.
Parameter:
max-dad-delay: set the ranging between 1 and 65535 seconds, its default value is 1 second.
Command Mode:
Port Mode.
Default:
1 second.
Usage Guide:
It is recommended to use the default value.
Example:
Set the detection lifetime as 2 seconds.
Switch(config)#savi max-dad-delay 2
58.1.13 savi max-dad-prepare-delay
Command:
savi max-dad-prepare-delay <max-dad-prepare-delay>
no savi max-dad-prepare-delay
Function:
Configure lifetime period of redetection for the dynamic binding, no command restores the default
value.
Parameter:
max-dad-prepare-delay: set the ranging between 1 and 65535 seconds, its default value is 1
second.
Command Mode:
Global Mode.
Default:
1 second.
Usage Guide:
It is recommended to user the default value.