PLANET XGS3-24042 - Manual (Page 582)

35-221
Switch(config-router)#redistribute ospf
35.53 router ospf
Command:
router ospf <process_id> <vrf-name>
no router ospf <process_id> <vrf-name>
Function:
This command is for relating the OSPF process and one VPN, after the configuration succeeded, all
configuration conmmands of this OSPF are relating with the VPN. The no command deletes the
OSPF instance with VPN routing/ forward instance.
Parameter:
<process_id> specifies the ID of the OSPF process to be created, the ranging from 1 to 65535.
<vrf-name> specifies the name of VPN routing/ forward instance.
Command Mode:
Global mode
Usage Guide:
Before using this command, using ip vrf command creates one VPN routing/ forward instance at first,
VPN routing/ forward instance is relating with OSPF instance by this command
Example:
Switch# config terminal
Switch(config)# router ospf 100
Switch(config-router)#network 10.1.1.0/24 area 0
35.54 show ip ospf
Command:
show ip ospf [<process-id>]
Function:
Display OSPF main messages.
Parameter:
<process-id> is the process ID, ranging between 0~65535.
Default:
Not displayed
Command Mode: