PLANET XGS3-24042 - Manual (Page 282)

15-128
CoS, the ranging is 0~7.
Default:
No match standard by default
Command Mode:
Class-map Mode
Usage Guide:
Only one match standard can be configured in a class map. When configuring the match ACL,
permit rule as the match option, apply Policy Map action. Deny rule as the excluding option, do not
apply Policy Map action. If configure another match rule after one was configured, the operation
fails, but configure the same match rule will cover the previous.
Example:
Create a class-map named c1, and configure the class rule of this class-map to match packets with
IP Precedence of 0.
Switch(config)#class-map c1
Switch(Config-ClassMap-c1)#match ip precedence 0
Switch(Config-ClassMap-c1)#exit
15.7 mls qos aggregate-policy
Command:
Single Bucket Mode:
mls qos aggregate-policy <policer_name> <bits_per_second> <normal_burst_bytes>
[{exceed-action ACTION}]
Dual Bucket Mode:
mls qos aggregate-policy <policer_name> <bits_per_second> <normal_burst_bytes> (pir
<peak_rate_bps> | <maximum_burst_bytes>) ({exceed-action ACTION | violate-action
ACTION )
ACTION definition:
drop | transmit | set-internal-priority <intp_value> | policied-intp-transmit
[no] mls qos aggregate-policy <policer_name>
Function:
Define an aggregate policy command, analyze the working mode of the token bucket, whether it is
single rate singe bucket, singe rate dual bucket or dual rate dual bucket, and set the corresponding
action for different color packets. The no operation will delete the mode configuration.
Parameters:
policer_name: the name of aggregation policy;
bits_per_second: the committed information rate - CIR , in Kbps, ranging from 1 to 10000000;