Lenze 8400 StateLine - Manual (Page 129)

Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
129
5 Motor control (MCTRL)
5.4 V/f characteristic control (VFCplus)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.4.2 Basic settings
The "Initial commissioning steps" listed in the table below are sufficient for a simple characteristic
control.
• Detailed information on the individual steps can be found in the following subchapters.

Tip!
Information on the optimisation of the control mode and the adaptation to the real
application is provided in chapter " Optimising the control mode ". ( 132)
Parameterisable additional functions are described correspondingly in the chapter
" Parameterisable additional functions ". ( 202)
Initial commissioning steps
1. Defining the V/f characteristic shape . ( 130)
2. Defining current limits (Imax controller) . ( 131)