8basic drive functions (mck) – Lenze 8400 StateLine User Manual
Page 419
Advertising
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
419
8
Basic drive functions (MCK)
8.4
Holding brake control
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Selection of the feedforward control value
From version 11.00.00 onwards
, the feedforward control value can be selected via bit 4 in
• Bit 4 = 0: Automatic selection
• The torque saved at the last stop is used.
• Bit 4 = 1: Manual selection
• bMBrakeStartValue2 = FALSE: The feedforward control value 1 set in
is used.
• bMBrakeStartValue2 = TRUE: The feedforward control value set in
is used.
Related topics:
Advertising