Lenze 8400 StateLine - Manual (Page 99)

Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
99
4 Device control (DCTRL)
4.4 Internal interfaces | "LS_DriveInterface" system block
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Inputs
Identifier
DIS code | data type
Information/possible settings
wCANControl
C00136/2 | WORD
Control word via system bus (CAN)
• The controller controlled by a master control (e.g. IPC) receives its control word by
the CANopen system bus interface. The process data word is provided at this
input by the upstream port block LP_CanIn1 .
• For a detailed description of the individual control bits, see chapter
" wCANControl/wMCIControl control words ". ( 101)
wMCIControl
C00136/1 | WORD
Control word via communication module (e.g. PROFIBUS)
• The controller controlled by a master control (e.g. IPC) receives its control word by
a plugged-in communication module. The process data word is provided at this
input by the upstream port block LP_MciIn1 .
• For a detailed description of the individual control bits, see chapter
" wCANControl/wMCIControl control words ". ( 101)
bCInh
C00833/36 | BOOL
 Enable/Inhibit controller ( 80)
FALSE Enable controller: The controller switches to the " OperationEnabled "
device state, if no other source of a controller inhibit is active.
• C00158 provides a bit coded representation of all active
sources/triggers of a controller inhibit.
TRUE Inhibit controller (controller inhibit): The controller switches to the
" SwitchedOn " device state.
bFailReset
C00833/37 | BOOL
 Reset error message ( 448)
FALSETRUE The current error is reset.
bStatus_Bit0
bStatus_Bit2
bStatus_Bit3
bStatus_Bit4
bStatus_Bit5
bStatus_Bit14
bStatus_Bit15
C00833/38 ... 44 | BOOL
Freely assignable bits in the status word of the controller
• You can use these bits for returning information to the master control (e.g. IPC).
bFree_1
bFree_2
bFree_3
bFree_4
C00833/45 ... 48 | BOOL
Reserved inputs have no function