Lenze 8400 StateLine - Manual (Page 773)

Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
773
15 Parameter reference
15.2 Parameter list | C00994
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00994
C00995
C00996
C00997
Parameter | Name:
C00994 | Flying restart fct.: Current
Data type: INTEGER_16
Index: 23581
d
= 5C1D
h
Current to be injected during the flying restart process
• 100 % ≡ rated motor current ( C00088 ).
• The flying restart current should amount to 10 ... 25 % of the rated motor current.
 Flying restart fct.
Setting range (min. value | unit | max. value) Lenze setting
0.00 % 100.00 25.00 %
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00995 | SLPSM: Controlled current setpoint
Data type: UNSIGNED_16
Index: 23580
d
= 5C1C
h
From version 10.00.00
 Sensorless control for synchronous motors (SLPSM)
Setting range (min. value | unit | max. value)
5.00 % 400.00
Subcodes Lenze setting Info
C00995/1 100.00 % SLPSM : Controlled accelerating current
C00995/2 20.00 % SLPSM : Controlled standstill current
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00996 | SLPSM: Switching speed
Data type: INTEGER_16
Index: 23579
d
= 5C1B
h
From version 10.00.00
 Sensorless control for synchronous motors (SLPSM)
Setting range (min. value | unit | max. value)
0.00 % 100.00
Subcodes Lenze setting Info
C00996/1 13.00 % SLPSM : Switching speed, closed-loop control
C00996/2 8.00 % SLPSM : Switching speed, open-loop control
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00997 | SLPSM: Filter cutoff frequency
Data type: INTEGER_16
Index: 23578
d
= 5C1A
h
From version 10.00.00
 Sensorless control for synchronous motors (SLPSM)
Setting range (min. value | unit | max. value) Lenze setting
0.00 % 100.00 5.00 %
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100