1 following connections of inputs and outputs, Following connections of inputs and outputs, 16 working with the fb editor – Lenze 8400 StateLine User Manual
Page 874
16
Working with the FB Editor
16.3
Using the FB Editor as "Viewer"
874
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
16.3.1
Following connections of inputs and outputs
In addition to the
you can use the context menu of inputs and outputs to follow
connections and quickly reach certain signals.
How to navigate from one output to another connected input:
1. Open the context menu (right mouse button) of the port symbol at the output.
• The context menu for the port symbol contains all inputs which are connected to the
output:
2.
Select input in the context menu to which you want to navigate.
• As a result, the selected input is displayed in the centre of the drawing area (in this
example: nGPAnalogSwitchOut_a):