15 parameter reference – Lenze 8400 StateLine User Manual
Page 598
15
Parameter reference
15.2
Parameter list
598
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Subcodes
Lenze setting
Info
C00002/1
0: Off / ready
Load Lenze setting
• All parameters are reset to the Lenze setting.
• Only possible when the controller is inhibited.
C00002/2
0: Off / ready
Reserved
C00002/3
0: Off / ready
Reserved
C00002/4
0: Off / ready
Reserved
C00002/5
0: Off / ready
Reserved
C00002/6
0: Off / ready
Load all parameter sets
• All parameter sets are loaded by the memory module.
• Only possible when the controller is inhibited.
C00002/7
0: Off / ready
Reserved
C00002/8
0: Off / ready
Reserved
C00002/9
0: Off / ready
Reserved
C00002/10
0: Off / ready
Reserved
C00002/11
0: Off / ready
Save all parameter sets
• All parameter sets are saved to the memory module
safe against mains failure.
C00002/12
0: Off / ready
Reserved
C00002/13
0: Off / ready
Reserved
C00002/14
0: Off / ready
Reserved
C00002/15
0: Off / ready
Reserved
C00002/16
1: On / start
Enable controller
1 ≡ Enable controller
0 ≡ Inhibit controller
C00002/17
0: Off / ready
Activate quick stop
1 ≡ Activate quick stop
0 ≡ Deactivate quick stop
Activate/deactivate quick stop
C00002/18
0: Off / ready
Reserved
C00002/19
0: Off / ready
Reset error
• After the reset (acknowledgement) of the current
error, further errors may be pending which must also
be reset.
• The status determining error is displayed in
.
• The current error is displayed in
Error messages of the operating system
C00002/20
0: Off / ready
Reserved
C00002/21
0: Off / ready
Delete logbook
• All entries in the logbook of the controller are deleted.
• In the logbook, information on the error history is
saved.
C00002/22
0: Off / ready
Reserved
Parameter | Name:
C00002 | Device command
Data type: UNSIGNED_8
Index: 24573
d
= 5FFD
h