Lenze 8400 StateLine - Manual (Page 54)

3 Commissioning
3.7 Commissioning of the "Actuating drive speed" technology application
54
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.7.3 Parameterising the motor control
1. Select the Application parameters tab from the Workspace.
The motor control parameters, among other things, can be found on the left:
2. In the Motor control list field ( C00006 ), select the desired motor control.
3. Adapt the motor control parameters:
Related topics:
 Notes on motor control ( 46)
 Motor control (MCTRL) ( 104)
Parameter Lenze setting Info
Value Unit
V/f base frequency
( C00015 )
50.0 Hz  Adapting the V/f base frequency ( 133)
Imax in motor mode
( C00022 )
47.00 A  Optimising the Imax controller ( 136)
Vmin boost
( C00016 )
1.60 %  Adapting the Vmin boost ( 135)