Lenze 8400 StateLine - Manual (Page 388)

7 Technology applications
7.5 "GeneralPurpose" functions
388
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.5.6 Analog comparison
This function compares two analog signals and can be used e.g. to realise a trigger. The comparison
operation, hysteresis and window size can be parameterised.
[7-23] GeneralPurpose function "Analog comparison"
• For a detailed functional description see FB L_Compare .
7.5.7 Binary signal monitor
This function serves to output four binary signals selected from a list of all binary output signals
available in the drive controller. You can set an inversion of the output signals.
[7-24] GeneralPurpose function "Binary signal monitor"
• For a detailed functional description see FB L_SignalMonitor_b .
bGPCompareOut
nGPCompareIn1_a
nGPCompareIn2_a
f =
C00680
C00682 C00681
C00830/16
C00830/17
Parameter Info Lenze setting
Value Unit
C00680 L_Compare_1: Fct. 6: |In1| < |In2|
C00681 L_Compare_1: Hysteresis 0.50 %
C00682 L_Compare_1: Window 2.00 %
bGPSignalOut1
C00411/1 C00412 - Bit 0
0
1
C00411/2
C00411/3
C00411/4
bGPSignalOut2
C00412 - Bit 1
0
1
bGPSignalOut3
C00412 - Bit 2
0
1
bGPSignalOut4
C00412 - Bit 3
0
1
Parameter Info Lenze setting
Value Unit
C00411/1...4 L_SignalMonitor_b: Signal 1 ... 4 0: Not connected
C00412 L_SignalMonitor_b: Inversion Bit coded