Lenze 8400 StateLine - Manual (Page 469)

Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
469
9 Diagnostics & error management
9.9 Error messages of the operating system
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
dH68: Adjustment data error CU [xx.0400.00104]
dH69: Adjustment data error BU [xx.0400.00105]
dH70: ControlUnit is unequal to BaseUnit [xx.0400.00106]
User error 1 [xx.0980.00000 ... xx.0980.65535]
User error 2 [xx.0981.00000 ... xx.0981.65535]
User error 3 [xx.0982.00000 ... xx.0982.65535]
Response (Lenze setting printed in bold)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
Device error Consultation with Lenze required.
Response (Lenze setting printed in bold)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
Device error Consultation with Lenze required.
Response (Lenze setting printed in bold)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
Device error Consultation with Lenze required.
Response (Lenze setting printed in bold) Setting: C00581/1 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
User error 1 has been tripped via the bSetError1 input of
the LS_SetError_1 system block.
User-defined.
Response (Lenze setting printed in bold) Setting: C00581/2 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
User error 2 has been tripped via the bSetError2 input of
the LS_SetError_1 system block.
User-defined.
Response (Lenze setting printed in bold) Setting: C00581/3 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
User error 3 has been tripped via the bSetError3 input of
the LS_SetError_1 system block.
User-defined.