Lenze 8400 StateLine - Manual (Page 483)

Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
483
10 Oscilloscope function
10.4 Managing oscillograms (measured data sets)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.4 Managing oscillograms (measured data sets)
If several measured data sets are loaded in the oscilloscope at the same time, the data set to be
displayed is selected via the Oscillogram list field. There are three types of data sets:
Online data record
The ONLINE data set is the only data set which can be used to establish a connection to the target
system to carry out an oscilloscope measurement.
Offline data record
The OFFLINE data set is a data set already stored in the project or a data set imported from a file.
• The configuration of the OFFLINE data set can be reused for future recordings.
• The OFFLINE data set is displayed in the Oscillogram list field with the name assigned to it upon
saving.
Merge data record
The MERGE data set is automatically available in the Oscillogram list field if two or more data sets
are loaded in the oscilloscope at the same time.
• In the merge data record, several characteristics from the currently loaded data records can
overlaid, e.g. to compare signal characteristics from different recordings.  Overlay function
( 486)
10.4.1 Commenting the oscillogram
In the Comments text field, you can enter a comment on the oscillogram selected.
• When the Saving the oscillogram command is executed, the comment is saved in the file
together with the data set.
• If you execute the Loading the oscillogram command and then select a data set in the Load
data set dialog box, the corresponding comment is shown in the dialog box.