Lenze 8400 StateLine - Manual (Page 787)

Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
787
15 Parameter reference
15.2 Parameter list | C01763
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01763
C01764
C01765
C01770
C01771
C01772
C01773
C01774
Parameter | Name:
C01763 | Service code -clamp threshold
Data type: INTEGER_16
Index: 22812
d
= 591C
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01764 | Service par. clamp time
Data type: UNSIGNED_8
Index: 22811
d
= 591B
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01765 | Service code - difference threshold UG
Data type: UNSIGNED_16
Index: 22810
d
= 591A
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01770 | Filter time - earth-fault detect. is running
Data type: UNSIGNED_8
Index: 22805
d
= 5915
h
From version 05.00.00
Setting range
(min. value | unit | max. value)
Lenze setting
0 ms 250 2 ms
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01771 | BU-Osc: Cycle time selection
Data type: UNSIGNED_8
Index: 22804
d
= 5914
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01772 | BU-Osc: Trigger channel selection
Data type: UNSIGNED_8
Index: 22803
d
= 5913
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01773 | BU-Osc: Trigger command
Data type: UNSIGNED_8
Index: 22802
d
= 5912
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01774 | BU-Osc: Trigger mode
Data type: UNSIGNED_8
Index: 22801
d
= 5911
h
This code is for device-internal use only and must not be written to by the user!