Lenze 8400 StateLine - Manual (Page 697)

Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
697
15 Parameter reference
15.2 Parameter list | C00505
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00505
C00506
Parameter | Name:
C00505 | Password data
Data type: VISIBLE_STRING
Index: 24070
d
= 5E06
h
From version 06.00.00
 Device access protection
Subcodes Lenze setting Info
C00505/1 MasterPin
C00505/2 Binding ID
C00505/3 Password
 Read access  Write access  CINH  PLC-STOP  No transfer  COM  MOT Character length: 16
Parameter | Name:
C00506 | PW protection internal config
Data type: UNSIGNED_16
Index: 24069
d
= 5E05
h
From version 15.00.00
Configuration of the password protection for device-internal parameter access
 Individual password protection for single access channels
Setting range (min. hex value | max. hex value)
0x0000 0xFFFF
Value is bit-coded: Info
Bit 0 Only access to user menu The menus in the keypad are reduced. Only the user
menu can be used to change parameters.
Bit 1 Parameter write protection Via system blocks ( LS_ParReadWrite1-6 and
LS_WriteParamList ), write/read parameters cannot be
written.
Bit 2 Parameter read protection Via system blocks ( LS_ParReadWrite1-6 and
LS_WriteParamList ), write/read parameters cannot be
read.
Bit 3 Reserved
Bit 4 Reserved
Bit 5 Reserved
Bit 6 Reserved
Bit 7 Reserved
Bit 8 Reserved
Bit 9 Reserved
Bit 10 Reserved
Bit 11 Reserved
Bit 12 Reserved
Bit 13 Reserved
Bit 14 Reserved
Bit 15 Reserved
Subcodes Lenze setting Info
C00506/1 0x0007 PW protection internal config
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT