C00008 | original application|control source, 15 parameter reference – Lenze 8400 StateLine User Manual

Page 604

Advertising

Parameter reference

15.2

Parameter list | C00008

604

Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

C00008

Parameter | Name:

C00008 | Original application|control source

Data type: UNSIGNED_16

Index: 24567

= 5FF7

Display of the originally selected technology application and the originally selected control mode.

• This parameter shows the selection that was set with

C00005

and

C00007

before a change in the I/O level or the

application level was carried out.

• For diagnostic purposes, this display serves to determine whether there is a standard interconnection in the

controller or a change carried out by the user.

Selection list

(read only)

Info

0 Free|Free

Application: Interconnection has been changed.

I/O level: Interconnection has been changed.

10 Free|Terminal0

Application: Interconnection has been changed.

I/O level: "Terminals 0" control mode

12 Free|Terminal2

Application: Interconnection has been changed.

I/O level: "Terminal 2" control mode

14 Free|Terminal11

Application: Interconnection has been changed.

I/O level: "Terminal 11" control mode

16 Free|Terminal 16

Application: Interconnection has been changed.

I/O level: "Terminal 16" control mode

20 Free|Keypad

Application: Interconnection has been changed.

I/O level: "Keypad" control mode

21 Free|PC

Application: Interconnection has been changed.

I/O level: "PC" control mode

30 Free|CAN

Application: Interconnection has been changed.

I/O level: "CAN" control mode

40 Free|MCI

Application: Interconnection has been changed.

I/O level: "MCI" control mode

1000 Speed|Free