Lenze 8400 StateLine - Manual (Page 238)

5 Motor control (MCTRL)
5.12 Monitoring
238
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.12.1 Device overload monitoring (Ixt)
C00064/1...3 displays the device utilisation (ixt) in [%] in different time intervals:
• If the device utilisation reaches the switch-off threshold set in C00123 :
• The error response set in C00604 will be carried out (Lenze setting: "Warning").
• The " oC5: Ixt overload " error message will be entered into the Logbook.
• The bMctrlIxtOverload status output of the LS_DeviceMonitor system block will be set to
TRUE.
• A setting of C00604 = "0: No Reaction" deactivates the monitoring.
Parameter Info
C00064/1 Device utilisation (Ixt)
• Maximum value of pulse utilisation ( C00064/2 )
and permanent utilisation ( C00064/3 ).
C00064/2 Device utilisation (Ixt) 15s
• Pulse utilisation over the last 15 seconds (only for loads >160 %).
C00064/3 Device utilisation (Ixt) 3 min
• Permanent utilisation over the last 3 minutes.
Highlighted in grey = display parameter