Lenze 8400 StateLine - Manual (Page 424)

9 Diagnostics & error management
9.3 Drive diagnostics with the »Engineer«
424
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

How to diagnose a drive with the »Engineer«:
1. In the Project view, select the 8400 StateLine controller.
2. Click the icon or select the OnlineGo online command to build up an online
connection with the controller.
3. Select the Diagnostics tab.
• With an online connection, the Diagnostics tab displays current status information
about the controller.

Tip!
The online connection to the controller can be established via the following device
interfaces:
• CAN interface X1
Diagnostics via the System bus "CAN on board" ( 488)
• X6 diagnostic interface
We recommend this diagnostic connection when the X1 CAN interface is used for
process communication.