Lenze E82xVxxxKxxxxx - Manual (Page 169)

Extensions for automation
Standard devices in a power range from 0.25 ... 2.2 kW
Mounting and dismounting function modules
7
l
169 EDS82EV903 EN 3.0
Dismounting
8200vec602
Fig. 7−2 Worksteps
1. Disconnect the drive controller from mains and wait at least 3 minutes!
2. To unlatch the circlip
4, position the screwdriver between the circlip and the
function module and press it to the right. Then remove the circlip
4.
3. Grasp the bar of the plug connector
3 using tongs and unplug the plug connector
together with the function module
2.
4. Fit the FIF cover
0 onto the FIF interface.