Lenze E82xVxxxKxxxxx - Manual (Page 333)

Function library
Free interconnection of analog signals
Free configuration of analog outputs
10
l
333 EDS82EV903 EN 3.0
IMPORTANT Possible settings Code
Selection Lenze Name No.
C0419
v
(Cont.)
Possible analog signals for C0419 ^ 332
0 Output frequency
(MCTRL1−NOUT+SLIP) 6 V/12 mA/5.85 kHz º C0011
1 Device utilisation (MCTRL1−MOUT) at
V/f characteristic control (C0014 = 2 or
3) 3 V/6 mA/2.925 kHz º rated active
inverter current (active
current/C0091)
Actual motor torque (MCTRL1−MACT)
with vector control (C0014 = 4) or
sensorless torque control (C0014 = 5) 3 V/6 mA/2.925 kHz º rated
motor torque
2 Apparent motor current
(MCTRL1−IMOT) 3 V/6 mA/2.925 kHz º rated
inverter current
3 DC−bus voltage (MCTRL1−DCVOLT) 6 V/12 mA/5.85 kHz º DC 1000 V
(400 V mains)
6 V/12 mA/5.85 kHz
º DC 380 V
(230 V mains)
4 Motor power (MCTRL1−PMOT) 3 V/6 mA/2.925 kHz º rated
motor power
5 Motor voltage (MCTRL1−VOLT) 4.8 V/9.6 mA/4.68 kHz ºrated
motor voltage
6 1/output frequency (1/C0050)
(MCTRL1−1/NOUT) 2 V/4 mA/1.95 kHz º 0.5 ´ C0011
7 Output frequency within adjusted
limits (DCTRL1−C0010...C0011) 0 V/0 mA/4 mA/0 kHz º f = f
min
(C0010)
6 V/12 mA/5.85 kHz
º f = f
max
(C0011)
8 Operation with process controller
(C0238 = 0, 1):
Actual process controller value
(PCTRL1−ACT) 6 V/12 mA/5.85 kHz º C0011
Operation without process controller
(C0238 = 2):
Output frequency without slip
(MCTRL1−NOUT)