7 wire and configure standard i/o pt, 8 wire and configure application i/o pt, 9 safety function - connection of relay ksr – Lenze E82xVxxxKxxxxx User Manual
Page 178: Wire and configure standard i/o pt, Wire and configure application i/o pt, Safety function − connection of relay ksr
Extensions for automation
Standard devices in a power range from 3 ... 11 kW
Wire and configure standard I/O PT
l
178
EDS82EV903 EN 3.0
Dismounting
8200vec617
Fig. 7−8
Worksteps
1. If the communication module is secured by means of a screw
2, loosen it.
2. Unplug the communication module
1 from the AIF interface.
7.2.7
Wire and configure standard I/O PT
)
Note!
Information about the wiring and configuration of the standard I/O is
provided later on in this chapter (
¶ 190).
7.2.8
Wire and configure application I/O PT
)
Note!
Information about the wiring and configuration of the application I/O is
provided later on in this chapter (
¶ 196).
7.2.9
Safety function − connection of relay K
SR
)
Note!
A complete description of the "Safe torque off" function can be found in the
chapter "Safety system"(
¶ 492).