Lenze E82xVxxxKxxxxx User Manual
Page 331
Advertising
![background image](/manuals/566070/331/background.png)
Function library
Free interconnection of analog signals
Free configuration of analog input signals
l
331
EDS82EV903 EN 3.0
Examples
ƒ
C0412/1 = 2
ð The frequency input is the signal source for setpoint 1 (NSET1−N1)
ƒ
C0412/5 = 23
ð CAN−IN1/word 4 is the signal source for the actual process
controller value (PCTRL−ACT)
)
Note!
The process data input words CAN−IN1.W1, CAN−IN1.W2, CAN−IN2.W1 and
CAN−IN2.W2 can be defined as analog word or as digital word (16 bit). If you
link them with internal analog signals (C0412/x = 20, 21 or 30, 31), they must
be defined as analog input words. Otherwise the controller cannot interpret
the signal correctly.
Advertising