Lenze E82xVxxxKxxxxx - Manual (Page 180)

Extensions for automation
Standard devices in a power range from 15 ... 90 kW
I/O function modules
7
l
180 EDS82EV903 EN 3.0
7.3.1 I/O function modules
Possible modules Type Comment
Standard I/O PT E82ZAFSC010 1 analog input (switchable between master
current/voltage)
1 analog output (voltage)
4 digital inputs
1 digital output
Application I/O PT E82ZAFAC010 2 analog inputs (switchable between master
current/voltage)
2 analog outputs (voltage or current)
6 digital inputs
2 digital outputs
1 frequency output
)
Note!
Information about the wiring and application is provided later on in this
chapter:
Standard I/O (
¶ 190)
Application I/O (
¶ 196)
7.3.2 Bus function modules
Possible modules Type Comment
PROFIBUS−DP E82ZAFPC010
PROFIBUS I/O E82ZAFPC201 With two digital inputs
System bus CAN PT E82ZAFCC010
System bus CAN I/O PT E82ZAFCC210 With two digital inputs
System bus CAN I/O RS PT E82ZAFCC100 With two digital inputs and possible external supply of
the control section of the 8200 vector
CANopen PT E82ZAFUC010
DeviceNet PT E82ZAFVC010
INTERBUS PT E82ZAFIC010
LECOM−B PT E82ZAFLC010 RS485 interface
AS interface PT E82ZAFFC010
)
Note!
Information on how to wire and use the modules can be found in the
corresponding mounting instructions and communication manuals.