Lenze E82xVxxxKxxxxx User Manual
Page 280
Advertising
Function library
Behaviour in the event of mains switching, mains failure or controller inhibit
Controlled deceleration after mains failure/mains disconnection
l
280
EDS82EV903 EN 3.0
Setting tips
Keep the deceleration as smooth as possible by setting the upper limit of the specified
bandwidth in C0988.
Do not exceed the current limit (generator mode) during the controlled deceleration.
)
Note!
ƒ
Changeover of the parameter set via terminal, bus or PC is not possible if
C0988 > 0!
ƒ
C0988 is always the same for all parameter sets.
Advertising