Lenze E82xVxxxKxxxxx - Manual (Page 296)

Function library
Configuration of analog and digital setpoints and actual values
Setpoint source selection
10
l
296 EDS82EV903 EN 3.0
10.7 Configuration of analog and digital setpoints and actual values
10.7.1 Setpoint source selection
Description
Fixed setpoint source selection.
ƒ C0001 = 0, 2: Setpoint source as described in the following. Link the setpoint source
with the internal analog signal under C0412.
ƒ C0001 = 1: Setpoint source is the parameter channel of AIF. The freely configurable
signals are switched off" (C0412/x = 0 or 255). The setpoint must be written to the
codes which are assigned to the signals (see signal flow charts or description of
C0412).
ƒ C0001 = 3: Setpoint source is the process data channel of AIF. The setpoint is written
to an AIF input word (AIF−IN.W1 or AIF−IN.W2). Link the AIF input word with the
internal analog signal under C0412.