Lenze E82xVxxxKxxxxx - Manual (Page 414)

Function library
Code table
10
l
414 EDS82EV903 EN 3.0
IMPORTANT Possible settings Code
Selection Lenze Name No.
C0411
v
Level inversion
− digital inputs 0 0 Level inversion switched off l By entering the sum of the
selected values you can invert
several inputs.
l C0114 and C0411 are the same
l The "Change over parameter
set" cannot be inverted!
1 E1 inverted
2 E2 inverted
4 E3 inverted
8 E4 inverted
16 E5 inverted Only application I/O
32 E6 inverted Only application I/O
64 T1/T2 inverted Only connect potential−free
switches to T1/T2.
T1/T2 is active when the switch is
open.