Lenze E82xVxxxKxxxxx - Manual (Page 231)

Parameter setting
Parameter setting with E82ZBC keypad
Activating password protection
9
l
231 EDS82EV903 EN 3.0
9.2.6 Activating password protection
)
Note!
If the password protection is activated (C0094 = 1 ... 9999), only the user menu
can be accessed freely.
ƒ The execution of all other functions requires entering the password first.
Please observe:
ƒ During a parameter set transfer, password−protected parameters will also
be overwritten.
ƒ The password will not be transferred.
Do not forget your password! However, if you have forgotten your password, it
can only be reset via a PC or a bus system!
Activate password protection
Step Key seq. Result Action
1. Change to the
all menu
t  Change to function bar 2
2. wx o
3. yz all Select the all menu (list of all codes)
4. t ΠConfirm selection and change to function bar 1
5. Enter password x f
6. z 0094 Code for password
7. x i
8. z XXXX Set password
9. v STOre Confirm password
10. Activate
password by
changing to the
user
menu
t  Change to function bar 2
11. wx o
12. yz user Select the user menu
13. t ΠConfirm selection and change to function bar 1
q The key indicates that the password protection is active.
The password protection is active now:
l Every time you want to quit the user menu, pass is displayed.
l If you enter the correct password and confirm with v, all functions can be accessed freely again.