Lenze E82xVxxxKxxxxx - Manual (Page 434)

Function library
Table of attributes
10
l
434 EDS82EV903 EN 3.0
10.20 Table of attributes
The data given in the table of attributes is required to write your own programs. It contains
all information for parameter communication with the controller.
How to read the table of attributes:
Column Meaning Entry
Code Name of the Lenze code Cxxxx
Index
dec Index under which the parameter is
addressed. The subindex of array
variables corresponds to the Lenze
subcode number. Is only required for control via
INTERBUS, PROFIBUS−DP or system
bus (CAN).
hex
Data DS Data structure E Single variable (only one parameter
element)
A Array variable (several parameter
elements)
DT Data type B8 1 byte bit−coded
B16 2 bytes bit−coded
B32 4 bytes bit−coded
FIX32 32 bit value with sign;
decimal with four decimal positions
I32 4 bytes with sign
U32 4 bytes without sign
VS ASCII string
Format LECOM format VD ASCII decimal format
VH ASCII hexadecimal format
VS String format
VO Octet string format for data blocks
DA Number of array elements
(subcodes) xx
DL Data length in bytes
Access R/W
Remote Access authorisation for LECOM Ra Reading is always permitted
Wa Writing is always permitted
W Writing is restricted
R/W CAN Access authorisation for system bus
(CAN) Ra Reading is always permitted
Wa Writing is always permitted
W Writing is restricted
Condition Condition for writing CINH Writing only permitted when
controller is inhibited