Lenze E82xVxxxKxxxxx - Manual (Page 222)

Parameter setting
Important notes
9
l
222 EDS82EV903 EN 3.0
9 Parameter setting
9.1 Important notes
Adapt the functions of the controller to the application
The controller functions can be adapted to your applications by means of
parameterisation. You can either parameterise via keypad, PC or via the parameter channel
of a bus system.
The function library contains a detailed description of the functions, the signal flow
diagrams contain all configurable signals.
Parameters and codes
The parameters for the functions are stored in numbered codes:
ƒ Codes are marked in the text with a "C" (e.g. C0002).
ƒ The code table provides a quick overview of all codes. The codes are sorted in
numerically ascending order and can be used as a reference. (
¶ 378)
Parameter setting via operating module
A quick parameter setting is provided by two operating modules, "keypad", in different
versions. Both serve as status displays, error diagnosis and transfer of parameters to other
drive controllers.
Keypad
E82ZBC Keypad XT
EMZ9371BC
Can be used with 8200 vector, 8200 motec,
starttec 8200 vector, 8200 motec,
starttec, Drive PLC, 9300 vector,
9300 servo
Operator buttons 8 8
Text display yes yes
Plain text display no yes
Menu structure User menu, code list User−specific menus
Configurable menu ( user menu") yes yes
Menu for quick commissioning ("Quick start") no yes
Predefined basic configurations no yes
Non−volatile memory for parameter transfer yes yes
Password protection yes yes
Diagnosis terminal yes yes
Installation in control cabinet yes no
Type of protection IP 55 IP 20
Detailed description ^ 224 ^ 235