Lenze E82xVxxxKxxxxx - Manual (Page 405)

Function library
Code table
10
l
405 EDS82EV903 EN 3.0
IMPORTANT Possible settings Code
Selection Lenze Name No.
C0265
v
Motor
potentiometer
configuration 3 0 Starting value = power off l Starting value: output
frequency which is approached
with Tir (C0012) after mains
connection when the motor
potentiometer is activated:
– "Power off" = actual value
when the power is switched
off
– "C0010": minimum output
frequency from C0010. The
setpoint must have
exceeded C0010 previously.
– "0" = output frequency of 0
Hz
l C0265 = 3, 4, 5:
– QSP also decelerates the
motor potentiometer along
the QSP ramp (C0105)
^ 307
1 Starting value = C0010
2 Starting value = 0
3 Staring value = power off
QSP if UP/DOWN = LOW
4 Starting value = C0010
QSP if UP/DOWN = LOW
5 Starting value = 0
QSP if UP/DOWN = LOW
C0304 Service codes Alterations by Lenze service only!
...
C0309