Lenze E82xVxxxKxxxxx - Manual (Page 74)

Mechanical installation
Standard devices in a power range from 3 ... 11 kW
Thermally separated mounting (push−through technique)
5
l
74 EDS82EV903−3.0
Mounting
a1
a2 a3
b3
b3
b2
8200vec310
Fig. 5−12 Dimensions for thermally separated mounting cutout 3 ... 11 kW
Dimensions [mm]
8200 vector a1 a2 a3 b2 b3
E82DV302K2C
80 +1 50 15
224 +1 23
E82DV402K2C
E82DV552K2C
123 +1 75 24
E82DV752K2C
E82DV302K4C
80 +1 50 15 E82DV402K4C
E82DV552K4C
E82DV752K4C
123 +1 75 24
E82DV113K4C
1. Slide earthing clamps on the frame with the correct sides:
– The contact springs have to point towards the rear panel of the control cabinet.
– The cutouts of the seal specify the positions.
2. Insert 8200 vector into cutout.
3. Tighten by means of 4 screws M4x10.
– Tightening torque: 1.7 Nm (15 lb−in)