Lenze E82xVxxxKxxxxx - Manual (Page 363)

Function library
Display of operating data, diagnostics
Display of operating data
10
l
363 EDS82EV903 EN 3.0
IMPORTANT Possible settings Code
Selection Lenze Name No.
C0050
*
uSEr
Output freq.
(MCTRL1−
NOUT) −650.00 {Hz} 650.00 Read only: Output frequency
without slip compensation
C0051
* Output freq.
with slip
compensation
(MCTRL1−NOUT
+SLIP) or
Actual process
controller
value
(PCTRL1−ACT) −650.00 {0.02
Hz}
650.00 The set value will be lost during
mains switching!
During operation without process
controller (C0238 = 2):
l Read only: output frequency
with slip compensation
(MCTRL1−NOUT+SLIP)
During operation with process
controller (C0238 = 0, 1):
l Selection if C0412/5 =
FIXED−FREE (not assigned)
l Display if C0412/5 is linked to
a signal source
^ 324
C0052
* Motor voltage
(MCTRL1−VOLT) 0 {V} 1000 Read only
C0053
* DC−bus voltage
(MCTRL1−
DCVOLT) 0 {V} 1000 Read only
C0054
* Apparent
motor current
(MCTRL1−
IMOT) 0.0 {A} 2000.0 Read only
C0056
* Device
utilisation
(MCTRL1−
MOUT) −255 {%} 255 Read only
The display value for the "Vector
control" or "Sensorless torque
control" operating mode can be
changed in C0311.
C0061
* Heatsink
temperature 0 { °C} 255 Read only
l If the heatsink temperature
>
J
max
− 5 °C:
– Warning OH is provided
– Switching frequency is
reduced to 4 kHz if C0144 = 1
l If the heatsink temperature
>
J
max
:
– Controller sets TRIP OH
C0138
* Process
controller
setpoint 1
(PCTRL1−SET1) 0.00 −650.00 {0.02
Hz}
650.00 The set value will be lost during
mains switching!
l Selection if C0412/4 =
FIXED−FREE
l Display if C0412/4 ¹
FIXED−FREE
^ 322
C0189
*
(A) Output signal −
follow−up
controller
(PCTRL1−FOLL1−
OUT) −650.00 {0.02
Hz}
650.00 Read only
Follow−up controller =
PCTRL1−FOLL1
C0320
(A) Actual process
controller value
(PCTRL1−ACT) −650.00 {0.02
Hz}
650.00 Read only
C0321
(A) Process
controller
setpoint
(PCTRL1−SET) −650.00 {0.02
Hz}
650.00 Read only