Lenze E82xVxxxKxxxxx - Manual (Page 66)

Mechanical installation
Standard devices in a power range from 0.25 ... 2.2 kW
Thermally separated mounting (push−through technique)
5
l
66 EDS82EV903−3.0
Mounting
1.
1.
2.
3.
3.
4.
5.
E82DV_002
Fig. 5−5 Thermally separated mounting 1.5 ... 2.2 kW
1. Slide on frame.
2. Insert seal.
3. Slide earthing clamps on the frame with the correct sides:
– The contact springs have to point towards the rear panel of the control cabinet.
– The cutouts of the seal specify the positions.
4. Insert 8200 vector into cutout.
5. Tighten by means of 8 screws M4x10.
– Tightening torque: 1.7 Nm (15 lb−in)