Lenze E82xVxxxKxxxxx - Manual (Page 90)

Mechanical installation
Standard devices with a power of 55 kW
Mounting with fixing brackets (standard)
5
l
90 EDS82EV903−3.0
Controller variant "3xx" (with fully mounted footprint filter)
For this mounting variant you require controller type E82EVxxxK4B3xx.
a
c1
b
d
d1
l
c
³ 50 mm ³ 50 mm
g
m
k
0
³ 100 mm
³ 100mm
e
8200vec298
Fig. 5−24 Standard mounting with fixing brackets 55 kW
 Loosen both screws to be able to remove the housing cover. The assembly kit is located under
the housing cover.
‚ Installation of mounting angles
ƒ Dimensions
0 Arrange the controllers side by side with spacing to be able to disassemble the eyebolts.
Dimensions [mm]
8200 vector integr. mains
filter
2)
a b b1 c c1 d d1 d2 e 1) g k m
E82EV553K4B3xx E82ZN55334B230 340 729 591 283 28.5 672 38 615 375 11 28 18
1) If the function module is attached: observe mounting clearance and cable bending radius. The terminals of function
modules in PT design protrude above the housing by 8 mm.
2) The integrated mains filters are only designed for controller operation at rated power. Different filters with different
dimensions are possible (
^ 106
).