Safety instructions – Lenze E82xVxxxKxxxxx User Manual
Page 22
Safety instructions
General safety information
l
22
EDS82EV903 EN 3.0
Safety functions
ƒ
Without a higher−level safety system, the described product must neither be used
for the protection of machines nor persons.
ƒ
Certain controller versions support safety functions (e.g. "Safe torque off", formerly
"Safe standstill").
The notes on the safety functions provided in the documentation of the versions must
be observed.
Maintenance and servicing
ƒ
The components are maintenance−free if the required operating conditions are
observed.
ƒ
If the cooling air is polluted, the cooling surfaces may be contaminated or the air
vents may be blocked. Under these operating conditions, the cooling surfaces and air
vents must be cleaned at regular intervals. Never use sharp objects for this purpose!
ƒ
Only replace defective fuses in the deenergised state to the type specified.
ƒ
After the system has been disconnected from the supply voltage, live components
and power connections must not be touched immediately because capacitors may
be charged. Please observe the corresponding notes on the device.
Disposal
ƒ
Recycle metals and plastic materials. Ensure professional disposal of assembled
PCBs.