7 wire and configure standard i/o pt, 8 wire and configure application i/o pt, Wire and configure standard i/o pt – Lenze E82xVxxxKxxxxx User Manual
Page 171: Wire and configure application i/o pt
Advertising
![background image](/manuals/566070/171/background.png)
Extensions for automation
Standard devices in a power range from 0.25 ... 2.2 kW
Wire and configure standard I/O PT
l
171
EDS82EV903 EN 3.0
Dismounting
8200vec607
Fig. 7−4
Worksteps
1. If the communication module is secured by means of a screw
2, loosen it.
2. Unplug the communication module
1 from the AIF interface.
7.1.7
Wire and configure standard I/O PT
)
Note!
Information about the wiring and configuration of the standard I/O is
provided later on in this chapter (
¶ 190).
7.1.8
Wire and configure application I/O PT
)
Note!
Information about the wiring and configuration of the application I/O is
provided later on in this chapter (
¶ 196).
Advertising