5 important codes for quick commissioning, Important codes for quick commissioning, Commissioning – Lenze E82xVxxxKxxxxx User Manual
Page 214
Commissioning
Important codes for quick commissioning
l
214
EDS82EV903 EN 3.0
8.5
Important codes for quick commissioning
)
Note!
ƒ
The following table describes the codes mentioned in the examples for
commissioning!
ƒ
All codes are described in detail in the function library.
How to read the code table
Column
Abbreviation
Meaning
Code
Cxxxx
Code Cxxxx
l
The parameter value of the code can be defined
differently within each parameter set
l
The parameter value is accepted immediately
(ONLINE)
1
Subcode 1 of Cxxxx
2
Subcode 2 of Cxxxx
*
Parameter value of the code is the same for all parameter sets and can be
changed in parameter set 1
v
Keypad E82ZBC
Changed parameter of the code or subcode will be
accepted after pressing
v
Keypad XT EMZ9371BC
Changed parameter of the code or subcode will be
accepted after pressing
T V
s
Keypad E82ZBC
Changed parameter of the code or subcode will be
accepted after pressing
v if the controller is
inhibited
Keypad XT EMZ9371BC
Changed parameter of the code or subcode will be
accepted after pressing
T V if the controller is
inhibited
(A)
Code, subcode or selection only available for operation with application I/O
uSEr
Code is contained in the Lenze setting in the USER menu
Designation
Name of the code
Lenze
Lenze setting (value at delivery or after restoring the delivery status with C0002)
à
Further information can be obtained from the "IMPORTANT" column
Selection
1
{%}
99 Min. value
{unit} max. value
IMPORTANT
−
Brief, important explanations